|We manufacture a range of cattle grids. We deliver and can position directly where it needs to go with our crane truck, if the area has been prepared and we have good site access. The grid comes as a complete unit, ready for installation. The galvanized capping on the edge of the concrete base prevents tyre damage. They are suitable for on-farm use, e.g. grazing properties where traffic consists of medium tractors, milk tankers, stock floats.|
|All our grids come standard with:
Duragal steel construction (mild steel not recommended in coastal areas)
Duragal steel with or without winged sides with infill triangleŚneeded for stock security
Fully engineered, 40mpa high strength steel reinforced, precast concrete base with galvanized capping and hold down bolts
Our standard cattle grid is designed to carry 10 ton per axle load limit.
Our heavy duty cattle grid is designed to carry 14 ton per axle load limit.
Cattle grids come in two sizes:
3.4m Wide 2.1m Across 500mm Deep (Depth of excavation needed)
4.0m Wide 2.1m Across 500mm Deep (Depth of excavation needed )
Always install grid slightly above road surface and build up road surface to the grid. This stops water run-off from the road way entering the grid. If possible it is a good idea to drain the grid, this is not possible in some cases. The grids do not need to be installed level if the road way is not level, in other words follow the slope and grade of the existing road way.
|Adobe Web Designs||
Aussie Precast Products
|Aerated Wastewater Treatment||Water Storage Tanks||Stock Troughs||Cattle Grids||Concrete Fire Bunker||Other Products||About Us||Contact Us|